IM/Press Wash

IM Press Wash (logo)


Finger Lakes Im/Press Wash™ is an environmentally conscious formula designed for de-inking parts, rollers and equipment in today’s modern press industry. Im/Press Wash™ will quickly and effectively remove most types of inks from various types of roll material, such as steel or rubber compound rollers. The water-emulsified formula is non-flammable, contains no chlorinated solvents or petroleum products, is biodegradable, non-caustic, non-corrosive, phosphate free, has a pH of 9.5 – 10.5, alcohol free and contains no regulated VOCs (EPA testing method #8240). Im/Press Wash™ is an emulsion material designed to be mixed with water. Water is the catalyst that releases the emulsion system to de-ink parts. It may be cut up to 20:1. To find the best results, it is recommended to cut product in increments of 5%.


1. For best results, spray a liberal amount of Im/Press Wash onto the area to be de-inked.
2. Let set for one to two minutes, then wipe away with a clean cloth.
3. Repeat process until clean.


  • 1 gal (#FLSC96128) 4/case
  • 5 gal (#FLSC9605) pail
  • 55 gal (#FLSC9655) drum

Product #:

FLSC96128, FLSC9605, FLSC9655

Print this page.

Download PDF:

Contact Us

Use the convenient Contact form to email your questions or comments, or call us at:


U.S. Customers
Castle AutoChem Products Ltd services Canadian customers only.

U.S. customers, please visit the Castle U.S. Website,
or call 1-800-876-0222.